The IPlaneSequenceGeometry graph node interface. More...

#include "murl_graph_i_plane_sequence_geometry.h"

Inheritance diagram for Murl::Graph::IPlaneSequenceGeometry:

Public Member Functions
virtual INode *	GetNodeInterface ()=0
	Get the mutable Graph::INode interface. More...

virtual const INode *	GetNodeInterface () const =0
	Get the constant Graph::INode interface. More...

virtual ITransform *	GetTransformInterface ()=0
	Get the mutable Graph::ITransform interface. More...

virtual const ITransform *	GetTransformInterface () const =0
	Get the constant Graph::ITransform interface. More...

virtual IAtlasResourceTarget *	GetAtlasResourceTarget ()=0
	Get a mutable Graph::IAtlasResourceTarget container. More...

virtual const IAtlasResourceTarget *	GetAtlasResourceTarget () const =0
	Get a constant Graph::IAtlasResourceTarget container. More...

virtual Bool	AddAttribute (IEnums::AttributeItem item)=0
	Add an attribute item to the plane's vertex data prior to initialization. More...

virtual Bool	RemoveAttribute (IEnums::AttributeItem item)=0
	Remove an attribute item frome the plane's vertex data prior to initialization. More...

virtual Bool	SetTextureSize (Real sizeX, Real sizeY, UInt32 index=0)=0
	Set the texture reference size. More...

virtual Bool	SetTextureSizeX (Real sizeX, UInt32 index=0)=0
	Set the horizontal texture reference size. More...

virtual Bool	SetTextureSizeY (Real sizeY, UInt32 index=0)=0
	Set the vertical texture reference size. More...

virtual Real	GetTextureSizeX (UInt32 index=0) const =0
	Get the horizontal texture reference size. More...

virtual Real	GetTextureSizeY (UInt32 index=0) const =0
	Get the vertical texture reference size. More...

virtual Bool	SetTexCoord (Real x1, Real y1, Real x2, Real y2, UInt32 index=0)=0
	Set the plane's texture coordinates. More...

virtual Bool	SetTexCoord1 (Real x1, Real y1, UInt32 index=0)=0
	Set the plane's start texture coordinates. More...

virtual Bool	SetTexCoord2 (Real x2, Real y2, UInt32 index=0)=0
	Set the plane's end texture coordinates. More...

virtual Bool	SetTexCoordX1 (Real x1, UInt32 index=0)=0
	Set the plane's horizontal start texture coordinate. More...

virtual Bool	SetTexCoordY1 (Real y1, UInt32 index=0)=0
	Set the plane's vertical start texture coordinates. More...

virtual Bool	SetTexCoordX2 (Real x2, UInt32 index=0)=0
	Set the plane's horizontal end texture coordinate. More...

virtual Bool	SetTexCoordY2 (Real y2, UInt32 index=0)=0
	Set the plane's vertical end texture coordinates. More...

virtual Real	GetTexCoordX1 (UInt32 index=0) const =0
	Get the plane's horizontal start texture coordinate. More...

virtual Real	GetTexCoordY1 (UInt32 index=0) const =0
	Get the plane's vertical start texture coordinate. More...

virtual Real	GetTexCoordX2 (UInt32 index=0) const =0
	Get the plane's horizontal end texture coordinate. More...

virtual Real	GetTexCoordY2 (UInt32 index=0) const =0
	Get the plane's vertical end texture coordinate. More...

virtual Real	GetFrameSizeX () const =0
	Get the width of the currently displayed atlas rectangle. More...

virtual Real	GetFrameSizeY () const =0
	Get the height of the currently displayed atlas rectangle. More...

virtual Real	GetFrameSizeX (UInt32 frameIndex) const =0
	Get the width of a given atlas rectangle. More...

virtual Real	GetFrameSizeY (UInt32 frameIndex) const =0
	Get the height of a given atlas rectangle. More...

virtual Bool	SetContainerAlignment (IEnums::AlignmentX alignmentX, IEnums::AlignmentY alignmentY)=0
	Set the horizontal container alignment. More...

virtual Bool	SetContainerAlignmentX (IEnums::AlignmentX alignmentX)=0
	Set the horizontal container alignment. More...

virtual Bool	SetContainerAlignmentY (IEnums::AlignmentY alignmentY)=0
	Set the vertical container alignment. More...

virtual IEnums::AlignmentX	GetContainerAlignmentX () const =0
	Get the horizontal container alignment. More...

virtual IEnums::AlignmentY	GetContainerAlignmentY () const =0
	Get the vertical container alignment. More...

virtual Bool	SetBorder (Real borderX, Real borderY)=0
	Set the horizontal and vertical borders used for alignment. More...

virtual Bool	SetBorderX (Real borderX)=0
	Set the horizontal border used for alignment. More...

virtual Bool	SetBorderY (Real borderY)=0
	Set the vertical border used for alignment. More...

virtual Real	GetBorderX () const =0
	Get the horizontal border used for alignment. More...

virtual Real	GetBorderY () const =0
	Get the vertical border used for alignment. More...

virtual Bool	SetRectangleName (const String &rectangleName)=0
	Set the current atlas rectangle by name. More...

virtual String	GetRectangleName () const =0
	Get the current rectangle's name. More...

Public Member Functions inherited from Murl::Graph::IDrawable
virtual Bool	SetVerticesSlot (SInt32 slot)=0
	Set the vertices slot used for rendering. More...

virtual SInt32	GetVerticesSlot () const =0
	Get the vertices slot used for rendering. More...

virtual Bool	SetMaterialSlot (SInt32 slot)=0
	Set the material slot used for rendering. More...

virtual SInt32	GetMaterialSlot () const =0
	Get the material slot used for rendering. More...

virtual Bool	SetParametersSlot (SInt32 slot)=0
	Set the parameters slot used for rendering. More...

virtual SInt32	GetParametersSlot () const =0
	Get the parameters slot used for rendering. More...

virtual Bool	SetTextureSlot (UInt32 unit, SInt32 slot)=0
	Set a texture slot used for rendering. More...

virtual SInt32	GetTextureSlot (UInt32 unit) const =0
	Get a texture slot used for rendering. More...

virtual Bool	SetVerticesSlotOffset (SInt32 slot)=0
	Set the vertices slot offset used for rendering. More...

virtual SInt32	GetVerticesSlotOffset () const =0
	Get the vertices slot offset used for rendering. More...

virtual Bool	SetMaterialSlotOffset (SInt32 slot)=0
	Set the material slot offset used for rendering. More...

virtual SInt32	GetMaterialSlotOffset () const =0
	Get the material slot offset used for rendering. More...

virtual Bool	SetParametersSlotOffset (SInt32 slot)=0
	Set the parameters slot offset used for rendering. More...

virtual SInt32	GetParametersSlotOffset () const =0
	Get the parameters slot offset used for rendering. More...

virtual Bool	SetTextureSlotOffset (UInt32 unit, SInt32 slot)=0
	Set a texture slot offset used for rendering. More...

virtual SInt32	GetTextureSlotOffset (UInt32 unit) const =0
	Get a texture slot offset used for rendering. More...

virtual Bool	SetBufferAccessMode (IEnums::BufferAccessMode mode)=0
	Set the buffer access mode. More...

virtual IEnums::BufferAccessMode	GetBufferAccessMode () const =0
	Get the buffer access mode. More...

virtual Bool	SetPrimitiveType (IEnums::PrimitiveType type)=0
	Set the primitive type used for rendering. More...

virtual IEnums::PrimitiveType	GetPrimitiveType () const =0
	Get the primitive type used for rendering. More...

virtual Bool	SetMaxNumberOfLightStages (UInt32 maxNumStages)=0
	Set the maximum number of light stages used for rendering. More...

virtual UInt32	GetMaxNumberOfLightStages () const =0
	Get the maximum number of light stages used for rendering. More...

virtual Bool	SetMaxNumberOfBonesPerVertex (UInt32 maxNumBones)=0
	Set the maximum number of bones per vertex for vertex skinning. More...

virtual UInt32	GetMaxNumberOfBonesPerVertex () const =0
	Get the maximum number of bones per vertex for vertex skinning. More...

virtual Bool	SetViewCullingEnabled (Bool enabled)=0
	Enable/disable view culling. More...

virtual Bool	IsViewCullingEnabled () const =0
	Check if view culling is enabled. More...

virtual Bool	SetDynamicBatchingAllowed (Bool allowed)=0
	Allow/disallow dynamic batching. More...

virtual Bool	IsDynamicBatchingAllowed () const =0
	Check if dynamic batching is allowed. More...

virtual Bool	SetClippingAllowed (Bool allowed)=0
	Allow/disallow clipping. More...

virtual Bool	IsClippingAllowed () const =0
	Check if clipping is allowed. More...

virtual Bool	SetCpuSkinningEnabled (Bool enabled)=0
	Enable/disable CPU vertex skinning. More...

virtual Bool	IsCpuSkinningEnabled () const =0
	Check if CPU vertex skinning is enabled. More...

Public Member Functions inherited from Murl::Graph::IIndexed
virtual Bool	SetIndex (SInt32 index)=0
	Set the current index. More...

virtual SInt32	GetIndex () const =0
	Get the current index. More...

virtual SInt32	GetFirstIndex () const =0
	Get the lowest valid index. More...

virtual UInt32	GetNumberOfIndices () const =0
	Get the total number of valid indices. More...

Public Member Functions inherited from Murl::Graph::IScalable
virtual Bool	SetScaleFactor (const Vector &scaleFactor)=0
	Set individual scaling factors for the X, Y and Z axes. More...

virtual Bool	SetScaleFactor (Real x, Real y, Real z)=0
	Set individual scaling factors for the X, Y and Z axes. More...

virtual Bool	SetScaleFactor (Real s)=0
	Set a uniform scaling factor for all three axes. More...

virtual Bool	SetScaleFactorX (Real x)=0
	Set the scaling factor for the X axis only. More...

virtual Bool	SetScaleFactorY (Real y)=0
	Set the scaling factor for the Y axis only. More...

virtual Bool	SetScaleFactorZ (Real z)=0
	Set the scaling factor for the Z axis only. More...

virtual const Vector &	GetScaleFactor () const =0
	Get the scaling factors for the X, Y and Z axes. More...

virtual Real	GetScaleFactorX () const =0
	Get the scaling factor for the X axis. More...

virtual Real	GetScaleFactorY () const =0
	Get the scaling factor for the Y axis. More...

virtual Real	GetScaleFactorZ () const =0
	Get the scaling factor for the Z axis. More...

Detailed Description

The IPlaneSequenceGeometry graph node interface.

This interface represents a flat rectangular geometry object (quad) in world space that retrieves its actual size and texture coordinates from a given Resource::IAtlas object.

Use the Graph::IIndexed base interface to access the individual rectangles stored in the referenced resource atlas.
Use the Graph::IScalable base interface to set an overall scaling factor for the geometry.

See Graph::IPlaneGeometry for a non-animated version.

Member Function Documentation

◆ GetNodeInterface() [1/2]

virtual INode* Murl::Graph::IPlaneSequenceGeometry::GetNodeInterface ( )

pure virtual

Get the mutable Graph::INode interface.

This method returns a mutable pointer to the node's Graph::INode interface, to be able to query or modify common node properties such as active state, visibility or ID.

Returns: The mutable Graph::INode interface, or null if not available

◆ GetNodeInterface() [2/2]

virtual const INode* Murl::Graph::IPlaneSequenceGeometry::GetNodeInterface ( ) const

pure virtual

Get the constant Graph::INode interface.

This method returns a constant pointer to the node's Graph::INode interface, to be able to query common node properties such as active state, visibility or ID.

Returns: The constant Graph::INode interface, or null if not available

◆ GetTransformInterface() [1/2]

virtual ITransform* Murl::Graph::IPlaneSequenceGeometry::GetTransformInterface ( )

pure virtual

Get the mutable Graph::ITransform interface.

This method returns a mutable pointer to the node's Graph::ITransform interface, to be able to query or modify the node's transformation matrix and depth order.

Returns: The mutable Graph::ITransform interface, or null if not available

◆ GetTransformInterface() [2/2]

virtual const ITransform* Murl::Graph::IPlaneSequenceGeometry::GetTransformInterface ( ) const

pure virtual

Get the constant Graph::ITransform interface.

This method returns a constant pointer to the node's Graph::ITransform interface, to be able to query the node's transformation matrix and depth order.

Returns: The constant Graph::ITransform interface, or null if not available

◆ GetAtlasResourceTarget() [1/2]

virtual IAtlasResourceTarget* Murl::Graph::IPlaneSequenceGeometry::GetAtlasResourceTarget ( )

pure virtual

Get a mutable Graph::IAtlasResourceTarget container.

This method returns a mutable pointer to a Graph::IAtlasResourceTarget container, which allows to add, remove or query the atlas resources referenced by a node implementing this interface.

Returns: The mutable Graph::IAtlasResourceTarget container, or null if not available

◆ GetAtlasResourceTarget() [2/2]

virtual const IAtlasResourceTarget* Murl::Graph::IPlaneSequenceGeometry::GetAtlasResourceTarget ( ) const

pure virtual

Get a constant Graph::IAtlasResourceTarget container.

This method returns a constant pointer to a Graph::IAtlasResourceTarget container, which allows to query the atlas resources referenced by a node implementing this interface.

Returns: The constant Graph::IAtlasResourceTarget container, or null if not available

◆ AddAttribute()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::AddAttribute ( IEnums::AttributeItem item )

pure virtual

Add an attribute item to the plane's vertex data prior to initialization.

This method allows to add one of the available attribute items to the plane's internal vertex buffer. Available items from the IEnums::AttributeItem enum are NORMAL, BINORMAL, TANGENT, COLOR, TEXCOORD_0 and TEXCOORD_1. The item COORD is always present, and by default also TEXCOORD_0 is active. See also RemoveAttribute() to unset the latter one.

Parameters

item	The item to add.

Returns: true if successful.

◆ RemoveAttribute()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::RemoveAttribute ( IEnums::AttributeItem item )

pure virtual

Remove an attribute item frome the plane's vertex data prior to initialization.

See AddAttribute().

Parameters

item	The item to remove.

Returns: true if successful.

◆ SetTextureSize()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTextureSize	(	Real	sizeX,
		Real	sizeY,
		UInt32	index = `0`
	)

pure virtual

Set the texture reference size.

Generally, texture coordinates are represented by values ranging from 0.0 to 1.0. As a convenience, this method can be used to set an arbitrary reference size for both dimensions of the plane; this way it is possible to specify integer (pixel) values instead of (quite unreadable) floats. For example, if a 256x128 texture is to be used when rendering this plane, a sizeX value of 256 and sizeY value of 128 directly maps incoming integer texture coordinates to whole texture pixels. Note, that it may also be necessary to set these values depending on the actual texture coordinates stored in the Resource::IAtlas that is referenced; it is often desired to store an atlas' texture coordinates with an already present scale factor. Use the index parameter to specify the actual set of texture coordinates for which to set the reference size, either 0 for TEXCOORD_0 or 1 for TEXCOORD_1.

Parameters

sizeX	The horizontal (X, or U) texture coordinate reference size.
sizeY	The vertical (Y, or V) texture coordinate reference size.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTextureSizeX()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTextureSizeX	(	Real	sizeX,
		UInt32	index = `0`
	)

pure virtual

Set the horizontal texture reference size.

See SetTextureSize().

Parameters

sizeX	The horizontal (X, or U) texture coordinate reference size.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTextureSizeY()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTextureSizeY	(	Real	sizeY,
		UInt32	index = `0`
	)

pure virtual

Set the vertical texture reference size.

See SetTextureSize().

Parameters

sizeY	The vertical (Y, or V) texture coordinate reference size.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ GetTextureSizeX()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetTextureSizeX ( UInt32 index = 0 ) const

pure virtual

Get the horizontal texture reference size.

See SetTextureSize().

Parameters

index The index of the texture coordinate set.

Returns: The horizontal (X, or U) texture coordinate reference size.

◆ GetTextureSizeY()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetTextureSizeY ( UInt32 index = 0 ) const

pure virtual

Get the vertical texture reference size.

See SetTextureSize().

Parameters

index The index of the texture coordinate set.

Returns: The vertical (Y, or V) texture coordinate reference size.

◆ SetTexCoord()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoord	(	Real	x1,
		Real	y1,
		Real	x2,
		Real	y2,
		UInt32	index = `0`
	)

pure virtual

Set the plane's texture coordinates.

This method sets the plane's start and end texture coordinates, to allow for rendering only part of the currently active texture on the plane. All given texture coordinate values are divided by their respective reference sizes (See SetTextureSize() for description), before they are actually applied for rendering. An IPlaneSequenceGeometry directly takes the texture coordinates for set #0 from the given atlas resource, so this method only accepts the value 1 for the index parameter to set texture coordinates for set #1 (TEXCOORD_1).

Parameters

x1	The start coordinate in X direction.
y1	The start coordinate in Y direction.
x2	The end coordinate in X direction.
y2	The end coordinate in Y direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTexCoord1()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoord1	(	Real	x1,
		Real	y1,
		UInt32	index = `0`
	)

pure virtual

Set the plane's start texture coordinates.

See SetTexCoord().

Parameters

x1	The start coordinate in X direction.
y1	The start coordinate in Y direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTexCoord2()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoord2	(	Real	x2,
		Real	y2,
		UInt32	index = `0`
	)

pure virtual

Set the plane's end texture coordinates.

See SetTexCoord().

Parameters

x2	The end coordinate in X direction.
y2	The end coordinate in Y direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTexCoordX1()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoordX1	(	Real	x1,
		UInt32	index = `0`
	)

pure virtual

Set the plane's horizontal start texture coordinate.

See SetTexCoord().

Parameters

x1	The start coordinate in X direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTexCoordY1()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoordY1	(	Real	y1,
		UInt32	index = `0`
	)

pure virtual

Set the plane's vertical start texture coordinates.

See SetTexCoord().

Parameters

y1	The start coordinate in Y direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTexCoordX2()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoordX2	(	Real	x2,
		UInt32	index = `0`
	)

pure virtual

Set the plane's horizontal end texture coordinate.

See SetTexCoord().

Parameters

x2	The end coordinate in X direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ SetTexCoordY2()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetTexCoordY2	(	Real	y2,
		UInt32	index = `0`
	)

pure virtual

Set the plane's vertical end texture coordinates.

See SetTexCoord().

Parameters

y2	The end coordinate in Y direction.
index	The index of the texture coordinate set.

Returns: true if successful.

◆ GetTexCoordX1()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetTexCoordX1 ( UInt32 index = 0 ) const

pure virtual

Get the plane's horizontal start texture coordinate.

See SetTexCoord().

Parameters

index The index of the texture coordinate set.

Returns: The start coordinate in X direction.

◆ GetTexCoordY1()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetTexCoordY1 ( UInt32 index = 0 ) const

pure virtual

Get the plane's vertical start texture coordinate.

See SetTexCoord().

Parameters

index The index of the texture coordinate set.

Returns: The start coordinate in Y direction.

◆ GetTexCoordX2()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetTexCoordX2 ( UInt32 index = 0 ) const

pure virtual

Get the plane's horizontal end texture coordinate.

See SetTexCoord().

Parameters

index The index of the texture coordinate set.

Returns: The end coordinate in X direction.

◆ GetTexCoordY2()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetTexCoordY2 ( UInt32 index = 0 ) const

pure virtual

Get the plane's vertical end texture coordinate.

See SetTexCoord().

Parameters

index The index of the texture coordinate set.

Returns: The end coordinate in Y direction.

◆ GetFrameSizeX() [1/2]

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetFrameSizeX ( ) const

pure virtual

Get the width of the currently displayed atlas rectangle.

Returns: The current atlas rectangle width.

◆ GetFrameSizeY() [1/2]

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetFrameSizeY ( ) const

pure virtual

Get the height of the currently displayed atlas rectangle.

Returns: The current atlas rectangle height.

◆ GetFrameSizeX() [2/2]

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetFrameSizeX ( UInt32 frameIndex ) const

pure virtual

Get the width of a given atlas rectangle.

Parameters

frameIndex The zero-based index into the referenced atlas resource's rectangles.

Returns: The atlas rectangle width, or 0 if the given index is out of range.

◆ GetFrameSizeY() [2/2]

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetFrameSizeY ( UInt32 frameIndex ) const

pure virtual

Get the height of a given atlas rectangle.

Parameters

frameIndex The zero-based index into the referenced atlas resource's rectangles.

Returns: The atlas rectangle height, or 0 if the given index is out of range.

◆ SetContainerAlignment()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetContainerAlignment	(	IEnums::AlignmentX	alignmentX,
		IEnums::AlignmentY	alignmentY
	)

pure virtual

Set the horizontal container alignment.

The given alignment values specify how the text container is actually positioned with respect to the node's world position.

Parameters

alignmentX	The horizontal container alignment.
alignmentY	The vertical container alignment.

Returns: true if successful.

◆ SetContainerAlignmentX()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetContainerAlignmentX ( IEnums::AlignmentX alignmentX )

pure virtual

Set the horizontal container alignment.

See SetContainerAlignment().

Parameters

alignmentX The horizontal container alignment.

Returns: true if successful.

◆ SetContainerAlignmentY()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetContainerAlignmentY ( IEnums::AlignmentY alignmentY )

pure virtual

Set the vertical container alignment.

See SetContainerAlignment().

Parameters

alignmentY The vertical container alignment.

Returns: true if successful.

◆ GetContainerAlignmentX()

virtual IEnums::AlignmentX Murl::Graph::IPlaneSequenceGeometry::GetContainerAlignmentX ( ) const

pure virtual

Get the horizontal container alignment.

Returns: The horizontal container alignment.

◆ GetContainerAlignmentY()

virtual IEnums::AlignmentY Murl::Graph::IPlaneSequenceGeometry::GetContainerAlignmentY ( ) const

pure virtual

Get the vertical container alignment.

Returns: The vertical container alignment.

◆ SetBorder()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetBorder	(	Real	borderX,
		Real	borderY
	)

pure virtual

Set the horizontal and vertical borders used for alignment.

Parameters

borderX	The horizontal border.
borderY	The vertical border.

Returns: true if successful.

◆ SetBorderX()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetBorderX ( Real borderX )

pure virtual

Set the horizontal border used for alignment.

Parameters

borderX The horizontal border.

Returns: true if successful.

◆ SetBorderY()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetBorderY ( Real borderY )

pure virtual

Set the vertical border used for alignment.

Parameters

borderY The vertical border.

Returns: true if successful.

◆ GetBorderX()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetBorderX ( ) const

pure virtual

Get the horizontal border used for alignment.

Returns: The horizontal border.

◆ GetBorderY()

virtual Real Murl::Graph::IPlaneSequenceGeometry::GetBorderY ( ) const

pure virtual

Get the vertical border used for alignment.

Returns: The vertical border.

◆ SetRectangleName()

virtual Bool Murl::Graph::IPlaneSequenceGeometry::SetRectangleName ( const String & rectangleName )

pure virtual

Set the current atlas rectangle by name.

If the given name is empty, the rectangle is explicitly set via a given index (see SetIndex()). This method fails if no atlas resource is set, or the given name is not found within the atlas resource.

Parameters

rectangleName The rectangle name.

Returns: true if successful.

◆ GetRectangleName()

virtual String Murl::Graph::IPlaneSequenceGeometry::GetRectangleName ( ) const

pure virtual

Get the current rectangle's name.

This method returns an empty string when no atlas resource is defined or the currently active rectangle is unnamed.

Returns: The rectangle name if available.

The documentation for this interface was generated from the following file:

murl_graph_i_plane_sequence_geometry.h

Public Member Functions

Detailed Description

Member Function Documentation

◆ GetNodeInterface() [1/2]

◆ GetNodeInterface() [2/2]

◆ GetTransformInterface() [1/2]

◆ GetTransformInterface() [2/2]

◆ GetAtlasResourceTarget() [1/2]

◆ GetAtlasResourceTarget() [2/2]

◆ AddAttribute()

◆ RemoveAttribute()

◆ SetTextureSize()

◆ SetTextureSizeX()

◆ SetTextureSizeY()

◆ GetTextureSizeX()

◆ GetTextureSizeY()

◆ SetTexCoord()

◆ SetTexCoord1()

◆ SetTexCoord2()

◆ SetTexCoordX1()

◆ SetTexCoordY1()

◆ SetTexCoordX2()

◆ SetTexCoordY2()

◆ GetTexCoordX1()

◆ GetTexCoordY1()

◆ GetTexCoordX2()

◆ GetTexCoordY2()

◆ GetFrameSizeX() [1/2]

◆ GetFrameSizeY() [1/2]

◆ GetFrameSizeX() [2/2]

◆ GetFrameSizeY() [2/2]

◆ SetContainerAlignment()

◆ SetContainerAlignmentX()

◆ SetContainerAlignmentY()

◆ GetContainerAlignmentX()

◆ GetContainerAlignmentY()

◆ SetBorder()

◆ SetBorderX()

◆ SetBorderY()

◆ GetBorderX()

◆ GetBorderY()

◆ SetRectangleName()

◆ GetRectangleName()